Our Products

We offer an incredibly diverse product selection.

Home / Products / Building Wire Copper / NMWU

NMWU

NMWU - NMWU

Two or three copper conductors with extra thickness of 60°C PVC insulation, Bare bonding wire and an overall sunlight resistant PVC jacket.

  • Rated 300 volts.
  • Meets CSA Spec. C22.2 No. 48-M90

    • Minimum recommended handling temperature minus 25°C (except for 3 conductor cables at minus 10°C) with suitable handling procedures.
    • Maximum conductor temperature: 60 degrees Celsius.
    • Click to view spec sheet: NMWU
    ECS Catalogue Number Conductor Approx. OD APPROX. WEIGHT AMPS COLOUR PUT-UPS (Length)
    AWG OR MCM NO. STRANDING (mm) (inches) (kgs/km) (lbs/1000ft)
    NMW14SL-02
    		 14 2 1 12.50 x 6.20 0.492 x 0.244 142 95 15 STANDARD COLOURS AVAILABLE 75, 150, 300
    NMW12SL-02
    		 12 2 1 13.35 x 6.62 0.526 x 0.261 173 117 20 STANDARD COLOURS AVAILABLE 75, 150, 300
    NMW10SL-02
    		 10 2 1 14.85 x 7.16 0.585 x 0.282 234 157 30 STANDARD COLOURS AVAILABLE 75, 150, 300
    NMW08ST-02
    		 8 2 7 19.71 x 9.70 0.776 x 0.382 402 270 40 STANDARD COLOURS AVAILABLE 75, 150, 300
    NMW14SL-03
    		 14 3 1 11.63 0.458 181 122 15 STANDARD COLOURS AVAILABLE 75, 150, 300
    NMW12SL-03
    		 12 3 1 12.54 0.494 227 152 20 STANDARD COLOURS AVAILABLE 75, 150, 300
    NMW10SL-03
    		 10 3 1 13.70 0.539 306 205 30 STANDARD COLOURS AVAILABLE 75, 150, 300
    NMW08ST-03
    		 8 3 7 18.31 0.721 523 351 40 STANDARD COLOURS AVAILABLE 75, 150, 300
    NMW06ST-03
    		 6 3 7 21.93 0.863 752 505 55 STANDARD COLOURS AVAILABLE 75, 150, 300

  • For direct earth burial (with protection as required by the inspection authority).
  • For wiring exposed to the weather.
  • For Category 1 and 2 locations (Ref. CE Code Part 1 Section 22) including barns, stables, etc.
  • For open and concealed wiring in wet or dry locations where not exposed to mechanical injury.


    For full design features, standard certifications and construction data, contact your sales Representative

    Note: All dimensions are nominal and are subject to normal manufacturing tolerance.
    Specifications are subject to change without prior notice

    Disclaimer: Great effort was taken to ensure the accuracy of the information presented, but errors or omissions may occur. This listing of information is presented as a courtesy and does not ensure that a product with these specifications is available. Specification and availability should be confirmed with a call to your local sales office.

    • Printing Instructions

    Close

    For best results in printing our product spec sheets, we request that you set your printer to Landscape Orientation.

    To proceed with printing this page, click the YES button below.